HELP CENTER
Search

PRODUCTS

Vertically integrated, fast and flexible, products of AMETEK ECP

Products

AMETEK ECP is the expert in electronics components, interconnects, and packaging. Our expertise drives faster product development, superior component design, and reliable performance in the most challenging environments.

AMETEK ECP is the wold's largest supplier of Solder preforms. Whether you want Solder Preforms in standard shapes (examples include squares, rectangles, washers and discs, or special solutions, AMETEK delivers faster, more reliably, and cost effectively.
Solder Preforms
Used for attaching electronic circuitry, packaging electronic devices, providing good thermal and electrical conductivity, and providing an interface for electronic connections.
AMETEK Electronic Components and Packaging Microstampings
Microstampings
Used as jumper chips, bonding pads, covers, heat sinks, lead frames, tabs, terminals. These precision stampings are used primarily to dissipate heat or provide an interface for an electronic circuit or component.
CCCA Coining Ceramic Cover Assemblies
Cover Assemblies
Combining the lid/cover with the preform is not new, so we made it better.
AMETEK Electronic Components and Packaging Wire and Ribbon products
Bonding Wire
Coining wire and ribbon are widely used as electrical interconnect materials to facilitate a bond between a chip and substrate or between two chips.
RF Connectors - AMETEK ECP icon
SMPx Series RF Connectors
Need faster and smaller?
SMPS is capable of frequencies up to 65 GHz
Copper-Core Connect
Copper Core Connect™
Coining enables designs for making a final, high-power, wire/ribbon connection to contact spots that otherwise cannot be reached or must be made in an earlier assembly step.
AMETEK Electronic Components and Packaging Transistor Outlines
Transistor Outlines
AMETEK offers a source of supply for most of these configurations. Listed below are many of the options we’ve manufactured throughout the years…

TO-3 | TO-5 | TO-8 | TO-46 | TO-66 | TO-254 | TO-256 | TO-257 | TO-258
Custom Circular Connectors
Custom Circular Connectors
Manufactured and customize to meet special performance requirements for high performance to more severe temperature applications like in Aerospace, Commercial and Military markets.
Rectangula Connector
Rectangular Connectors
AMETEK ECP has a long history of manufacturing Mil-C-24308/9 D Subminiature | Mil-C-28748 Rack & Panel | Mil-C-83513 Microminiature D connectors.
AMETEK Electronic Components and Packaging Battery End Seals and Capacitor End Seals
Battery End Seals
AMETEK uses hermetic glass-to-metal sealing technology for high reliability battery assemblies.
Multiple Pin Conflat Headers
Hermetic Headers
Terminals and headers are widely used in electrical devices. Designed for high precision high reliability applications for guidance navigation systems, surgical instruments and semiconductors manufacture.
Multiple Pin Headers
Multi-Pin Headers
Multi-pin headers used in sensors applications, that requires rugged, moisture resistant sensors that can withstand high levels of vibration, impact and general mechanical abuse.
HPHT Bulkheads
HPHT Electrical Bulkheads
Manufactures glass-to-metal-sealed high pressure high temperature (HPHT) Electrical bulkheads for aerospace, defense, industrial and commercial applications
Wet Mate
Subsea Feedthrough Penetrators
Our Subsea Connectors and Feedthrough Penetrators are designed to provide the high reliability upstream and downstream solutions for all subsea applications
CNC Machined Housings Electronic Packaging AMETEK ECP
Machined Housings
Machined packages are used primarily when the required shape of the housing prohibits the use of traditionally tooled components. From prototype to complex designs with tight tolerances, our machining capabilities set us apart.
Flatpacks Electronic Packaging AMETEK ECP
Flatpacks
Our flatpacks range from as narrow as 0.250” wide up to more than 2” long. Flatpacks have been made in sizes up to 4” square with over 350 leads.
Metal Platforms Plug-ins Electronic Packaging AMETEK ECP
Metal Platforms
Metal Platform Plug-ins (PF) are hermetic plates with leads or I/O’s which extend out the bottom of the enclosure.
Plug-ins Electronic Packaging AMETEK ECP
Plug-Ins
See our Plug-in style packages comes in two primary configurations. Plug-in Bathtub (PB) style and Plug-in Specials (PS).
Power Surface Mounts Electronic Packaging AMETEK ECP
Power Surface Mounts
AMETEK ECP has developed a very low thermally resistive, highly efficient, small, hermetic, surface mountable package.
HTCC Circular Electronic Packaging AMETEK ECP High Temperature Cofired Ceramics General Ceramics
Ceramics - HTCC
AMETEK ECP High Temperature Cofired Ceramic (HTCC) product achieves a variety of products with high reliability designs used in harsh environments.
AMETEK SCP Hull penetrator
Hull Penetrators
All AMETEK SCP Submarine Hull Penetrators are designed and manufactured in-house by our team of skilled development engineers for Navies around the world.
Elite Dry Mate Connector with Oilfield Mk 2 PBOF Connection - AMETEK PBOF Interconnect
High Performance Oil Filled
All AMETEK SCP High Performance Oil Filled are designed and manufactured in-house by our team of skilled development engineers for Navies around the world.
AMETEK SCP dry mate connectors
Glass to Metal Sealed Connectors
AMETEK SCP designs, develops and manufactures a complete range of rugged and reliable electrical and fiber optic connectors for extreme environments and critical applications.
RF Connectors - AMETEK ECP icon
RF Connectors
AMETEK ECP’s line of hermetic, push-on and blind-mate RF connectors, which includes the SMP, SMPM and SMPS connectors.
AMETEK Electronic Components and Packaging Cable Assembly
Subsea Cable Assemblies
AMETEK SCP offer a comprehensive solution for all of your rubber molding requirements from connector design to a complete cable assembly for most applications.
AMETEK SCP FOFT fiber optic feed thru
Fiber Optic Feed Thru
AMETEK SCP offer a comprehensive solution to provide you with the very latest in Fiber Optic Manufacturing methods and capability.

Data Sheets and Downloads

RF Connectors - AMETEK ECP icon
SMPx Series RF Connectors
Higher density vs. traditional SMA
• Radial & Axial Misalignment Tolerant
• Customizable
– Body Length
– Pin Extension & termination
– Multiport Configurations
S-Bend Ceramic Feedthrough
S-Bend RF Connectors
Problem: Hermetic Packages for Telecommunication Applications Require Improved Signal Integrity>40 GHz
Solution: The S-Bend Design Eliminates the Requirement for Vias in the Signal Path
AMETEK ECP is the only company that combines deep technical knowledge with operational excellence and responsiveness to create the greatest customer value.   Our expertise drives faster product development, superior component design, and reliable performance in the most challenging environments.   Our flexible and scalable global production system delivers defect-free products in the shortest lead times and with local application support.   AMETEK ECP is the supplier of choice for customers desiring electronic solutions with the fastest times to market, minimized risk, and the lowest cost of ownership